wconsd

h1. Screenshots

h2. Server Startup messages

When starting wconsd from a cmd window, you should see something like the following

C:\>wconsd.exe

wconsd: Serial Console server (version 0.2.4)
        (see http://wob.zot.org/2/wiki/wconsd for more info)

wconsd: Foreground mode
wconsd: Hostname is w000c2989d2df
wconsd: IP Address is 192.168.1.2
wconsd: listening on port 23

h2. Menu

When you first connect to the server, a menu is shown

wconsd serial port server (version 0.2.4)

NOTE: the commands will be changing in the next version

available commands:

close           - Stop serial communications
copyright       - Print the copyright notice
data            - Set number of data bits
help            - This guff
kill_conn       - Stop a given connection's serial communications
open            - Connect or resume communications with a serial port
parity          - Set the serial parity
port            - Set serial port number
quit            - exit from this session
show_conn_table - Show the connections table
speed           - Set serial port speed
status          - Show current serial port status
stop            - Set number of stop bits

w000c2989d2df>