Screenshots » History » Revision 3
Revision 2 (Hamish, 2008-04-23 16:11) → Revision 3/4 (Hamish, 2008-05-15 19:41)
h1. Screenshots
h2. Server Startup messages
When starting wconsd from a cmd window, you should see something like the following
<pre style="background-color:black; color:white">
C:\>wconsd.exe
wconsd: Serial Console server (version 0.2.4)
(see http://wob.zot.org/2/wiki/wconsd for more info)
wconsd: Foreground mode
wconsd: Hostname is w000c2989d2df
wconsd: IP Address is 192.168.1.2
wconsd: listening on port 23
</pre>
h2. Menu
When you first connect to the server, a menu is shown
<pre style="background-color:black; color:green">
wconsd serial port server (version 0.2.6) 0.2.4)
NOTE: the commands will be changing in the next version
available commands:
binary - toggle the binary comms mode
close - Stop serial communications
copyright - Print the copyright notice
data - Set number of data bits
help - This guff
kill_conn - Stop a given connection's serial communications
keepalive - toggle the generation of keepalive packets
open - Connect or resume communications with a serial port
parity - Set the serial parity
port - Set serial port number
quit - exit from this session
show_conn_table - Show the connections table
speed - Set serial port speed
status - Show current serial port status
stop - Set number of stop bits
w000c2989d2df>
</pre>
h2. Connecting to a serial device
<pre style="background-color:black; color:green">
w000c2989d2df> open
Opening default port
Router>
Router>
Router>
</pre>