Project

General

Profile

Activity

From 2008-04-21 to 2008-05-20

2008-05-15

19:39 Feature #31 (Closed): Implement a raw mode that does not mangle any recieved data
Added a binary mode in commit:"479f1136", which also contains fixes to the telnet option processing, such that a teln... Hamish

2008-05-09

15:51 Feature #25 (Closed): Full featured command line editing
Will be handled by the libcli conversion Hamish
15:47 Bug #28 (Closed): automatic help screens
Not a bug.
Also - will be handled completely by the libcli conversion
Hamish

2008-04-23

16:53 Feature #26: list available com ports
I have done some research and this appears to be more difficult than it should be.
* PORT_INFO_2 doesn't provide m...
Hamish

2008-04-22

10:34 Feature #23 (Closed): Support "send break" sequence
Hamish
10:29 Feature #27: redesign internal command processor to be extensible
Use libcli Hamish

2008-04-21

19:52 Feature #26: list available com ports
Look at http://msdn2.microsoft.com/en-us/library/ms535797.aspx
also, this example code: http://www.lookrs232.com/com...
Hamish
00:00 Feature #26 (New): list available com ports
it should be possible to request a list of available serial ports, including some current status for each one Hamish
19:16 Bug #30 (Closed): Some clients still cause two lines to be seen by the serial device
Hamish
19:12 Bug #30 (Closed): Some clients still cause two lines to be seen by the serial device
It turns out that I was only testing against one client and this was the client that sent CR NUL. Testing against pu... Hamish
19:15 Feature #32 (New): Mangle outbound net data to escape special characters
Currently, no escaping is done on data from serial to net, this could cause confusion when binary data is received fr... Hamish
19:14 Feature #31 (Closed): Implement a raw mode that does not mangle any recieved data
currently, there are three mangles performed on incoming net data - first telnet option processing, then CR NUL to CR... Hamish
18:46 Bug #20 (Closed): cannot return to menu
Hamish
18:46 Bug #16 (Closed): Extra line is seen after every enter
Hamish
15:34 Bug #19 (Closed): more than one connection causes wierdness
Using the new connection model mostly fixes this problem. Any future issues should be considered a regression Hamish
00:28 Feature #29 (New): Stop wconsd via a network command
Since I expect that this will be very useful for remote support situations, the network command line should allow you... Hamish
00:07 Bug #28 (Closed): automatic help screens
using a extensible command processor, automatically generate context sensitive help Hamish
00:03 Feature #27 (New): redesign internal command processor to be extensible
Move from a big if/strcmp/else list to a register()/find()/exec() interface. This would allow automatically generate... Hamish
 

Also available in: Atom