Project

General

Profile

Activity

From 2008-04-18 to 2008-05-17

2008-05-15

19:39 Feature #31 (Closed): Implement a raw mode that does not mangle any recieved data
Added a binary mode in commit:"479f1136", which also contains fixes to the telnet option processing, such that a teln... Hamish

2008-05-09

15:51 Feature #25 (Closed): Full featured command line editing
Will be handled by the libcli conversion Hamish
15:47 Bug #28 (Closed): automatic help screens
Not a bug.
Also - will be handled completely by the libcli conversion
Hamish

2008-04-23

16:53 Feature #26: list available com ports
I have done some research and this appears to be more difficult than it should be.
* PORT_INFO_2 doesn't provide m...
Hamish

2008-04-22

10:34 Feature #23 (Closed): Support "send break" sequence
Hamish
10:29 Feature #27: redesign internal command processor to be extensible
Use libcli Hamish

2008-04-21

19:52 Feature #26: list available com ports
Look at http://msdn2.microsoft.com/en-us/library/ms535797.aspx
also, this example code: http://www.lookrs232.com/com...
Hamish
00:00 Feature #26 (New): list available com ports
it should be possible to request a list of available serial ports, including some current status for each one Hamish
19:16 Bug #30 (Closed): Some clients still cause two lines to be seen by the serial device
Hamish
19:12 Bug #30 (Closed): Some clients still cause two lines to be seen by the serial device
It turns out that I was only testing against one client and this was the client that sent CR NUL. Testing against pu... Hamish
19:15 Feature #32 (New): Mangle outbound net data to escape special characters
Currently, no escaping is done on data from serial to net, this could cause confusion when binary data is received fr... Hamish
19:14 Feature #31 (Closed): Implement a raw mode that does not mangle any recieved data
currently, there are three mangles performed on incoming net data - first telnet option processing, then CR NUL to CR... Hamish
18:46 Bug #20 (Closed): cannot return to menu
Hamish
18:46 Bug #16 (Closed): Extra line is seen after every enter
Hamish
15:34 Bug #19 (Closed): more than one connection causes wierdness
Using the new connection model mostly fixes this problem. Any future issues should be considered a regression Hamish
00:28 Feature #29 (New): Stop wconsd via a network command
Since I expect that this will be very useful for remote support situations, the network command line should allow you... Hamish
00:07 Bug #28 (Closed): automatic help screens
using a extensible command processor, automatically generate context sensitive help Hamish
00:03 Feature #27 (New): redesign internal command processor to be extensible
Move from a big if/strcmp/else list to a register()/find()/exec() interface. This would allow automatically generate... Hamish

2008-04-20

23:58 Feature #25 (Closed): Full featured command line editing
Support for home, end, up, down, ctrl-u, ctrl-w, del, delete. Up and Down should access a command-line history Hamish
23:52 Bug #16: Extra line is seen after every enter
Implementing this will require a cooked data processing mode - thus allowing telnet option processing in serial-data-... Hamish
23:35 Bug #16: Extra line is seen after every enter
This is due to the telnet end of line processing - Telnet specifies that end of line will either be CR LF or CR NUL, ... Hamish
23:37 Bug #19: more than one connection causes wierdness
There is less weirdness here now, but it is still not actually accepting more than one connection. The framework has... Hamish
23:34 Bug #17 (Closed): No telnet option processing is done
Telnet option processing was added in commit:"08ceb73b". This still needs hooking into the serial-data-pump Hamish
23:32 Feature #21: Listen port needs to be configurable
Implemented a console-mode command-line option for this, but not the whole option processing that I was looking for Hamish
23:31 Feature #23: Support "send break" sequence
the telnet option processing framework now exists, but it is not hooked up to anything useful, nor it it reachable fr... Hamish

2008-04-18

18:32 Feature #23 (Closed): Support "send break" sequence
Once we support telnet option processing, it would be good to send a serial break sequence when a telnet send break i... Hamish
18:13 Feature #22 (New): Visible progress indicators displayed on the console
In order to provide feedback and reassure the end user that something is happening, it would be nice to have some fee... Hamish
16:56 Feature #21 (New): Listen port needs to be configurable
Currently, the port that this application will listen on is hard-coded. There should be the ability to configure thi... Hamish
15:55 Bug #18 (Closed): menu interpreter cannot handle receiving CR LF
Hamish
15:51 Bug #20 (Closed): cannot return to menu
Once a connection to the serial port is established, there is no method for returning to the original menu Hamish
15:50 Bug #19 (Closed): more than one connection causes wierdness
If the first connection is in the menu and a new connection arrives, it hangs.
If the first connection is talking ...
Hamish
 

Also available in: Atom